- Model NO.: AK-ID5005
- Color: Grey,Silver
- Method: Spray
- Main Raw Material: Acrylic
- Certification: ISO9001
- Formation Mechanism: Unknow
- Size: 400ml/500ml
- Net Weight: Customized
- Trademark: Autokem
- Origin: Guangdong, China
- Usage: All Kinds of Surface
- Appearance: Liquid
- Components: Pigment
- Level: Finish Coat
- Expiration Date: 2 years
- Packaging: Tinplate Cans
- Brand Name: Autokem
- Service: OEM
- Specification: 400/500ml
Autokem Industry Co.,Ltd established our own factory and lab in Guangdong proviince,manufactures aerosol spray paint in for many years.
Zinc Spray Paint
AUTOKEM ALL PURPOSE SPRAY PAINT is easy to use and suitable for virtually any interior or exterior surface.It is quick drying and gives an ultra smooth finish.It is tough, hard wearing and resistant to scratches.It comes in gloss, matt and satin finishes with the addition of primers and top coat.Offers a wide range of colors including metallic colors and fluorescent colors.
Features & Benefits:
--As high-quality rust protection primer
--For touching up welded or drilled sections
--As a conductive intermediate layer in spot welding
--Wherever metal must be protected from corrosion
1.Thoroughly clean grease, water track, dirt and dust on the surface before spraying.
Shake the can properly about 1 minute and spray evenly at a distance of 20cm away from the target.
2.When use for refinish purpose, repeat spraying 2-3 times, the film thickness to be according to the damaged situation .
3.Invert the can after use, spray 3 seconds till the gas emission. Clean nozzle with a cloth to avoid blocking
1.Trial spraying on small area of unknown materials and it is workable if there is no adverse reaction after 10 minutes.
2.Keep the can upwards while spraying and the angle is not less than 45 degrees from the horizon.
3.Please do not use in rainy or cold environment.
4.Please work in well ventilation condition and it is good for the spraying effect in cool and dry, dust-free environment.
5.Keep the can out of reach of children.
6.Store it in cool place which the temperature is between 0-40°C and keep it away from 7.fire and heat sources. It is prohibited to expose the spray paints in sunshine or burning.
8.After use, reversing the empty can and pressing the nozzle to release the remaining gas, then put the empty can in safe place.
1.Remove oil, soil, water stain and dust from the surface to be sprayed.
2.Shake can well before use.Use at room temperature.
3.Apply on an invisible part first to make sure the selected color is well matched.
4.Hold can 15-30 cm away from the surface to be sprayed.
5.During spraying, keep the can upright within a vertical angle of 45° .
6.After use, clear the valve and nozzle by spraying upside down for a few seconds.
1.Content under pressure.Keep away from heat, flame, spark and other source of ignition.
2.Do not spray on objects with direct contact of food.
3.Use only in well-ventilated place.
4.Do not incinerate or puncture the can even when empty.
5.Store in a cool, dry place ( do not store above 50° C);Avoid direct sunlight.
6.Keep out of the reach of children.
Packaging & Shipping
|Item No.||SIZE||CAN MATERIALS||CAN SIZE||CARTON SIZE||PACKING||20' container qty|
Autokem Inddustry Co., Ltd specializes in aerosol manufacturing, providing a wide range of aerosol product to clients in auto detailing, construction, marine, textile, agricultral, forestry, hardware tools, consumer electronics and many more.
We are dedicated manufacturer with professional strength that provides high-quality aerosol and specialty products to customers worldwide.
Our 1,500 square meters manufacturing plant is equipped with modern machines and instruments.Located in Zhongshan city, Guangdong province, with 4 filling lines, an independent chemical manufacturing facility and a testing lab, we commit to deliver high quality and cost-effective product.
1.Aerosol contract filling
2.OEM & ODM offered
3.Design and submission of samples for the products and/or packing material
4.Manufacture, fill, pack and QA checkout on finished products
5.All tests required for export
6.Custom declaration and related matters for export
7.Offer different formula, fragrance or design as per customer's requirement
8.Manufacturing according to customer's samples and specification
|Are you manufacturer or trading company?||We are chemical manufacturer with 10 years experience!|
|Where is your factory?||Our factory locates in Zhongshan, Guangzhou, China, with convenient access to sea ports in Guangzhou, Shenzhen, Hongkong.|
|Can you make my brand and label?Is there any extra charge?||Yes you can.OEM brand is acceptable, we can make customers' own brands and design without any extra charge.|
|What's the MOQ(min.Quantity)?||Common aerosol size tin can 3000PCS.Smaller aerosol size requires higher MOQ.|